The MC Series of amplifiers has been specifically developed for fixed installation and/or network applications. Thus they are equipped with specific connectors: Euro style input and screw terminal barrier strip output, to offer clear, direct and hassle-free connectivity. Furthermore they offer up to eight independent channels per unit to allow for as many zoning possibilities. Their unitary power output is dimensioned to suit specifically that type of installations.

Model Name:	SP1K8
Output Power 1 kHz 2 Ω	-
4 Ω	8 × 300 W
8 Ω	8 × 195 W
Bridge at 4 Ω	-
Bridge at 8 Ω	4 × 600 W
Output Circuity:	Class H, 2 steps
Frequency Range (power bandwidth ± 0.25 dB):	20 Hz – 20 kHz
THD (20 Hz – 20 kHz):	< 0.05 %
S/N Ratio:	110 dB
Damping Factor (20 Hz – 500 Hz at 8 Ohm):	> 500
Crosstalk (20 Hz – 20 kHz):	> 70 dB
Voltage Gain (selectable):	26 / 32 / 38 dB
Input Sensitivity:	2.0 / 1.0 / 0.5 V
Protection:	Soft-start, Turn-on / Turn-off Muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL Clip Limiter, SSP, FCM
Controls:	On/Off, Volume
Indicators:	Power, Standby
Connectors: Inputs:	Phoenix Connectors
Output:	screw terminals
Cooling System:	2 x continuously variable speed fan, rear to front
Power Supply:	AC~230V / 50 Hz
Power Consumption Full Load:	4.7 A
Dimensions (W x H x D):	483 × 89 × 210 mm
Weight:	6.2 kg